ディスク・デュプリケーター Disc Makers ReflexUltraのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Disc Makers ReflexUltra 2 ページ。 Dvd±r
Disc Makers ReflexUltra にも：クイック・スタート・マニュアル (2 ページ), ユーザーマニュアル (13 ページ)

ページを印刷する

ReflexUltra

Your ReflexUltra has been optimized to work with Disc Makers Ultra™ media. Our Ultra DVD-Rs and DVD+Rs will burn faster with less

rejects on the Reflex's state-of-the-art Plextor drives. That means you won't waste time or money on unsuccessful burns. PLEASE NOTE

THAT THE REFLEX ULTRA CAN ONLY DUPLICATE DISC MAKERS ULTRA media. Other media cannot be duplicated in this system

and will be rejected. To order Disc Makers Ultra media, go to www.discmarket.com/ultra, or call 1-888-800-4041.

BASIC OPERATION

THIS SIDE OF THE QUICK START GUIDE HAS BASIC

INSTRUCTIONS FOR DUPLICATING DVDs FROM THE

REFLEXULTRA'S 120 GB INTERNAL HARD DRIVE. THE

OPPOSITE SIDE HAS BASIC INSTRUCTIONS FOR

DUPLICATING DISC-TO-DISC, WHICH IS COPYING

DVD-Rs OR DVD+R

FROM A MASTER DVD PLACED IN

THE UNIT'S TOP DRIVE. FOR MORE DETAILED

INSTRUCTIONS ON THE REFLEXULTRA'S DUPLICATING

OPERATIONS, PLEASE REFER TO THE USER'S GUIDE

ON THE ATTACHED CD. THE REFLEXULTRA DVD±R

WILL ALSO DUPLICATE CD-R

BY FOLLOWING THESE

SAME INSTRUCTIONS.

DUPLICATING DVD

USING THE

INTERNAL HARD DRIVE

The ReflexUltra duplicates in two different modes –

Hard Drive-to-Disc mode, and Disc-To-Disc mode.

The Hard Drive-to-Disc mode copies the DVD

master to the unit's hard drive, and then duplicates

the data to each blank DVD-R or DVD+R placed in

the writer drives. This ensures an exact copy of the

original master to every disc. The Hard Drive-to-

Disc mode is very efficient for duplicating large

numbers of discs.

Power on the ReflexUltra by pressing the round

button at the bottom right on the front of the unit.

™

DVD±R Quick Start Guide

The system will initialize and perform a self-test,

which will be displayed on the LCD display area.

To set the Reflex to duplicate from the Hard-

Drive-to-Disc mode, press the DOWN arrow until

8. Select Source is displayed in the LCD screen.

Press the ENT button, and then press the DOWN

arrow until SRC: HDD IDEØ Master is displayed

on the screen. Press the ENT button, and HDD

Selected will be displayed on the screen. Then

press the ENT button again.

To copy your DVD master to the hard drive, you

must use the Image function. To access the Image

function, press the DOWN arrow until the LCD

screen displays 9. Image. Press the ENT button

and the following should appear on the LCD

screen:

9-01. Image

Load

Place your DVD master in the top drive and

press the ENT button. The master disc will begin

to be copied to the hard drive and the LCD screen

will read Image Load OK. The letters P: A that are

displayed on the screen indicate that your master

image has been successfully loaded into the "A"

partition of the hard drive. (The internal hard drive

of your ReflexUltra is broken into smaller parts

called "partitions." Each partition can hold one

www.discmakers.com

DVD image.) Remove your master.

Press the ESC button two times until 9. Image

appears in the LCD display. Then use the UP arrow

to return to 1. Copy.

You are now ready to duplicate. Load the drives

with Disc Makers Ultra DVD-Rs or DVD+Rs.

Close the drives and press the ENT button. The

duplication process will begin. (If you wish to dupli-

cate fewer than your unit's full capacity, load the

number of Ultra discs you need into the drives

and press the ENT button to start the duplication

process.) When the duplication process is complet-

ed, the ReflexUltra will eject the successfully

copied discs. When the duplication is complete,

the LCD will display:

1. Copy

OK: 04

P: A

Next to OK: will be the number of successfully

copied discs. In the screen example above, 4

copies were successfully duplicated.

Note: When the duplication process is complete, the writer drives will

automatically eject the discs that have been duplicated successfully. The

LCD screen will display the number of copies that have PASSED. If any

discs have not been duplicated successfully, the LCD screen will display

the number of copies that have FAILED. The discs that have not dupli-

cated successfully will remain in their drives until the eject button on each

drive is pressed. For information on why a DVD-R or DVD+R might not

copy successfully, please see the User's Guide on the attached CD.

1-888-800-4041

v1.1

P: A