- ページ 4

コントロールユニット ARMTEL ACM-IP2のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ARMTEL ACM-IP2 20 ページ。 Analogue subsystems module

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE

Product Passport

1 PRODUCT ESSENTIALS AND TECHNICAL INFORMATION

ENG

Product name: ACM-IP2 Analogue subsystems module

Short name of product: ACM-IP2

Product identification: RMLT.465275.006

Manufacturer: Armtel LLC

www.armtel.com

1.1 ACM-IP2 is designed for use in distributed and centralized digital Intercom and

Public Address / General Alarm communication systems (based on allotted SIP server) at

industrial and transportation facilities.

АСМ-IP2 enables to use analogue equipment and to interact with automation and alarm

units.

1.2 ACM-IP2 external appearance and overall dimensions

ACM-IP2 external appearance and overall dimensions are given at Figure 1.

ACM-IP2 is a printed board with electronic components, inserted in casing and fixed

on DIN-rail 35 mm wide.

Figure 1 shows:

− А2 – CPU-IP module;

− Х1, X2 – sockets for connection to Ethernet (including power supply by PoE plus);

Indicators on sockets X1 and X2:

1. Green – ON when there is physical connection with Ethernet network, blinking

when network interface is active (receiving or transmitting of data packages);

2. Orange – ON when the unit is powered from the PoE source;

− Х3, Х4 – sockets to connect analogue lines;

− Х8 – output socket of the integrated audio amplifier, (can be used, for example,

to listen to audio messages transmitted to terminal units);

− Х11 – socket of discrete lines (control lines), software configurable or as input

for connection, for example, direct call key of the terminal units or as output (for

load connection);

− Х19 – socket for external module ADSL-IP2 Adapter RMLT.468158.001;

page 2/16

armtel.com