- ページ 7

コンピュータ・ハードウェア Disc Makers 1.1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Disc Makers 1.1 15 ページ。 Dvd disc duplicator

ページを印刷する

1. Copy the master to the hard drive by using the 'Image' function. Press the

down arrow until you see "9. Image" then press the 'ENT' button you should

see:

9-01. Image

Load

2. Load the top drive with the master disc and press the 'ENT' button. The mas-

ter disc will be copied to the hard drive and the display will read "Image Load

OK"

3. Press the 'ESC' key two times until "9. Image" appears in the LCD display and

then use the up arrow to return to "1. Copy."

4. Load the drives with high quality optical media and press the "ENT" button.

The duplication process will begin and when completed the ReflexPro DVD

will eject the successfully copied discs. When the copy is complete the LCD

will read:

1. Copy

OK: 04

Appearing next to OK will be the number of successful copies. In the this

example 4 copies were successfully created.

ISC TO

ISC

OPYING

The ReflexPro DVD is factory preset to do hard drive to disc copying. The unit

can be changed to disc to disc mode relatively easily.

1. From the "1. Copy" screen press the down arrow until "8. Select Source"

appears in the LED window.

1-800-237-6666

P:A

www.discmakers.com

2. Press the 'ENT' button and the following window will appear:

SRC: hard drive

00 IDE0 Master

3. Press the down arrow once for "Src: DVD-RW Ø1 IDE1 Slave" press the 'ENT'

key and the new source will be the top DVD recorder drive. The LCD will dis-

play "DVD-RW selected!"

4. Press the up arrow to return to "1. Copy", notice that "P: A" is no longer dis-

played in this screen. This is how to tell if your unit is operating in the disc to

disc copy mode or the hard drive to disc mode. The hard drive to disc mode

will always show the "P:.." at the right side of the screen and what partition

of the drive is being used.

5. To begin the duplication operation, load the top drive (the Src drive) with the

master disc. Load the other recorders, one or as many as needed, with high

quality DVD-R media.

6. Press the "ENT" button to begin duplicating. The unit will automatically ana-

lyze the master disc, and begin duplicating at the maximum recording

speed.

9. The LCD will show the progress and display OK when the duplication is com-

plete. Upon successful duplication, all copied discs will be ejected, if any disc

fails the duplication it will remain in the bottom drive.

The LCD will display:

1. Copy

OK: 03

In this example three discs were successfully copied.