- ページ 2

コンピュータ・ハードウェア Disc Makers Reflex1のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Disc Makers Reflex1 12 ページ。 Dvd
Disc Makers Reflex1 にも：クイック・スタート・マニュアル (2 ページ), ユーザーマニュアル (6 ページ), ユーザーマニュアル (9 ページ)

Tutorial Guide:

I. Make Disc-to-Disc Copies

This process will copy your master disc onto blank disc simultaneously. However, due to its

simultaneous nature, a master in good conditioned and lower recording speed may be

necessary for high success rate and quality duplicates.

Once powered on, you should see the following when your duplicator is ready. (If this screen

does not appear, make sure the USB switch in the rear of the unit is not in the "ON" position)

Disc Makers

1.Copy Disc

Insert a master DVD / CD into the reading drive, which is the first drive. Then, insert a

blank DVD recordable disc into the recording drive, which is the second drive.

Press ENT button, this DVD / CD Duplicator will prompt you to select the desired

recording speed for this duplication.

For DVD duplication speed 8x or above, the duplicator will automatically scan

both your master disc and your blank disc for eligibility of 8x performance. If

either your master disc or your blank disc is not eligible for 8x performance, you

will not be able to see 8x speed selection.

Select Speed =

16 12 8 4 2 1

Select your desired recording speed by pressing the UP or DOWN button. Then press ENT

to confirm.

If the system didn't recognize a blank recordable disc in the Recording

drive, the LCD will display:

If you inserted a DVD-R / DVD+R /CD-R disc to duplicate, then such

Error ...

Not Blank Disc

- 2 -