- ページ 13

ウェザーステーション Aercus WS2083のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aercus WS2083 18 ページ。 Professional wireless weather station with usb upload

Press the ENTER key to select the following modes, then press the UP or DOWN key to set the value:



Temperature unit display – C or F.



Outdoor temperature high alarm (press ON/OFF to enable/disable). If the alarm is enabled, an

alarm symbol



Outdoor temperature low alarm (press ON/OFF to enable/disable). If the alarm is enabled, an

alarm symbol



Maximum temperature (since last reset). Resetting the maximum outdoor temperature value -

when both the outdoor temperature value and MAX icon are flashing, hold the ENTER key for 3s,

the maximum outdoor temperature value will be reset to the current reading.



Minimum temperature (since last reset). Resetting the minimum outdoor temperature value -

when both the outdoor temperature value and MIN icon are flashing, hold the ENTER key for 3s, the

minimum outdoor temperature value will be reset to the current reading.

Outdoor Humidity

Press the MENU key eleven times to select the OUTDOOR HUMIDITY section. Procedures and settings are

similar to Indoor Humidity.

Memory

Press the HISTORY key to activate the history data display. Press the DOWN key to toggle backwards to see

earlier weather history data together with its time stamp, press the UP key to see more recent weather

history. When the history data is displayed, the corresponding time will be displayed in the time section

area (the history data saving interval is preset to 30 minutes).

Pressing the ENTER key again will trigger the memory clear procedure, the word "CLEAR" will be flashing and

the full memory usage icon will be flashing. Pressing and holding the ENTER key for 3 seconds will clear the

memory.

Note: Historical values for some variables are only available once downloaded to PC and will appear as dashes

on the Base Station.

While in normal display, press and hold the UP key for 20 seconds to reset all settings to the manufacturer's

default settings.

appears in the display.

WS2083

- 13 -