- ページ 8

クワッドコプター Blade Blade 180QX HDのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Blade Blade 180QX HD 20 ページ。
Blade Blade 180QX HD にも：取扱説明書 (20 ページ)

Flight Mode and Rate Selection

RTF

Change ﬂ ight modes by moving the three-position ﬂ ight mode switch. Ensure

the ﬂ ight mode switch is in the desired position before ﬂ ying.

• In stability low angle mode (switch position 0), the controls provide a

minimum bank angle. This mode is shown by the ﬂ ight control board on

the quadcopter glowing solid blue.

• In stability high angle mode (switch position 1), the controls provide for a

maximum bank angle. This mode is shown by the ﬂ ight control board on

the quadcopter slowly ﬂ ashing blue.

• Agility mode (switch position 2) is shown by the ﬂ ight control board on

the quadcopter glowing solid red.

When powered on, this transmitter is automatically in high-rate mode.

Change rates by pressing and releasing the right control stick.

• In low-rate mode, the controls cannot reach their maximum values.

• In high-rate mode, the controls can reach their maximum values.

If you purchased a BNF 180 QX HD, the channel 5 switch on your transmitter will select ﬂ ight modes. When the LED on

the control board is solid blue, the ﬂ ight mode is set to stability low angle mode. When the LED is slowly blinking blue,

the quadcopter is in stability high angle mode. When the light is solid red, the quadcopter is in agility mode. See the

Transmitter Setup Table for speciﬁ c setup information.