- ページ 9
ソウ DISCO DAD341のPDF データ・メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。DISCO DAD341 20 ページ。 Automatic dicing/cutting saws
ページを印刷する
- 1. Read Carefully before Using this Manual
- 2. Introduction
- 2. Table of Contents
- 3. Contents
- 4. C. General Description of Data Screen
- 5. Important Safety Information
- 5. General Safety Precautions
- 5. Safety Precautions to be Observed During Operation
- 5. Inherently Hazardous Areas and Ways to Avoid Hazards
- 5. EMO Switch
- 5. Operations
External View [341/381]
The diagram and the table below show the external view, names and functions
of main constituents.
Chuck Table
EMO Switch
Operation Panel
Vacuum Gauge
Flowmeter
Splash Cover
Microscope
Monitor
Pilot Lamp
Disk Drive
Key Switch
POWER Lamp
Maintenance Switch Used by the maintenance personnel.
Light Intensity
Adjustment Dial
Maintenance switch
Light intensity
POWER lamp
adjustment dial
POWER
MANUAL
AXIS
AXIS
RELEASE
LOCK
ON
REMOTE
START
OFF
Key switch
Name
Used to mount workpieces on it.
Functions as the emergency stop switch. When
pressed, shuts off the electrical power supply.
Consists of operation control keys.
Indicates the chuck table vacuum pressure to attract
the workpiece to the chuck table.
Indicates the flow rate of the wheel coolant water.
Prevents water from splashing around during spindle
rotation and functions as a safety device.
Used to view workpieces for alignment and other
purposes.
Displays operating information and microscope
images.
Indicates the machine operating status with the green
and yellow lamps. If an error occurs, the red lamp
flashes on and off.
Functions as an external storage device.
Used to turn ON and OFF the machine by inserting
and rotating the key.
Lights while the power is ON.
Adjusts the microscope image light intensity.
Microscope
Splash cover
Flowmeter
Vacuum gauge
LAMP
VOLUME
Operation panel
Disk drive
Function
[341:Optional accessory/381:Standard part]
Intro-5
Pilot lamp
Monitor
Chuck table
EMO switch