- ページ 2

懐中電灯 Armytek Partner Pro C1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Armytek Partner Pro C1 2 ページ。

ページを印刷する

Set description

Partner

Items included in the package:

1 - Flashlight

5 - Lanyard

2 - Clip

6 - 2 spare O-rings

3 - Spare rubber button

7 - User manual

4 - Holster

Depending on the model, your flashlight can inconsiderably differ from the pictures in the manual.

The producer reserves the right to change the package at his own discretion without modifying this manual.

Initial Service

To set/replace batteries:

1. Unscrew the tailcap.

2. Place the batteries with the positive contact (+) facing the head of the flashlight.

3. Adjust the tailcap and tighten it as far as it can go.

We recommend NOT to leave power sources inside the flashlight for a long storage period, as batteries (especially, non-rechargeable) can leak

for various reasons and damage the inner parts of the flashlight. If you want to keep your flashlight in a stand-by state with batteries in, use new

and quality batteries, store the flashlight in acceptable for batteries operational temperature and revise the batteries' state at least once a

month. If you have noticed any signs of batteries' defects, withdraw them from the flashlight and take out of operation. It is also recommended

to replace discharged batteries with new ones before the storage as the chance of leakage is higher with discharged batteries.

Operation

The flashlights has 2 types of operation:

General. The flashlight is switched on/off permanently.

Tactical. The light turns on for the time the button is being pressed. It will switch on in the last memorized mode (except for the Special

modes). This type of operation is useful for short-time lighting and setting signals.

General

Tighten up

Click x1

OFF

гд

Cycling through modes

Click x1

Firefly

Maximum

Main1

Main3

Main2

Strobe

Press & Hold

Click

Strobe в Last used mode

гд

Press & Hold

Strobe

Strobe в Firefly

Tactical

Half Press & Hold (no click)

Release

1/2

OFF

State Indication

Battery level

Switching State Indication ON/OFF

< 100%

< 50%

5sec

Press & Hold

Low Battery Indication

High Temperature Indication

Warning

Critical

Warning

Critical

1sec

0.5sec

2sec

1sec

< 25%

< 5%

WARM

HOT

< 10%

HOT

вFirefly1

в65% of output

вOFF

вFirefly2

Automemorizing. After switching off the last used Mode is memorized for quick 1-click access at next switching on.

Lock-out function. Unscrew the tailcap to 1/4 for the protection from accidental switching on.

General:

1. First full click of the tailcap button turns the light on at the last used

mode.

2. Second full click turns it off.

Cycling through modes:

1. To switch the mode click the side button.

2. The modes switch cyclically: Firefly - Main1 - Main2 - Main3 -

Maximum.

Strobe:

1. When the flashlight is ON (at any mode) press and hold the side

button to turn on Strobe.

2. To switch to the last used mode click the side button once.

3. To switch to the Firefly mode press and hold the side button.

Tactical (only by tailcap button):

1. For tactical activation use half-pressing of the tailcap button (no

click!).

2. The light remains on while you half press the button.

Multicolor State Indication. Shows the battery level by short flashes

every 5 seconds. Only C2 Pro has State Indication in Firefly modes.

Switching Multicolor State Indication ON/OFF (C2 Pro only). It is

switched off by default in Firefly modes. To turn on and off: unscrew the

tailcap to 1/4 (the tailcap switch must be in ON state), press the side

button and holding the button pressed - tighten the tailcap and then

unscrew it again. The settings will be memorized even when battery is

changed.Warning Indication. In ON-state shows the battery level and

the temperature inside the flashlight.

Low battery level. When it is <25%, the color LED shows the warning

level once a second and the main LED flashes 2 times once a minute.

Critical level <5% is color indicated twice a second and light output

decreases to Firefly1 and then switched off.

High temperature. When it increases to the warning level, the color LED

flashes 3 times once in 2 seconds. At critical level the color LED flashes

3 times once a second, the main LED flashes 4 times once and the light

output decreases by 35%. In case the temperature doesn't fall the light

output decreases to Firefly2. At normal temperature the brightness

increases to usual level.

C2 Pro only: With ambient temperature +25°C the flashlight delivers

light in Maximum mode for about 6-10 minutes before the

temperature reaches critical level and brightness decreases. After

cooling-down (provided that battery voltage is sufficient) the

brightness increases to the Maximum mode again. This stepping

goes cyclically to maintain the user's safety and the flashlight's

functionality. In conditions of good air-cooling the flashlight delivers

constant light even in Maximum mode. There are no preset timers

for stepping, but real-time active temperature measurements.