- ページ 2

懐中電灯 Armytek Tiara C1 ProのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Armytek Tiara C1 Pro 2 ページ。

ページを印刷する

Set description

Tiara

Depending on the model, your flashlight can inconsiderably differ from the pictures in the manual.

The producer reserves the right to change the package at his own discretion without modifying this manual.

Initial Service

The removable magnet in the tailcap.

With its help you can easily attach the flashlight to an electric service panel, a bike handlebar,

above a car wheel, etc.

The magnet can be taken out of the tailcap. To do this unscrew the small cover at the end of the

tailcap and put the magnet out.

Specifying the battery type for correct voltage indication.

1xAA (for Tiara A1 Pro) / 1xCR123A (for Tiara C1 Pro)

battery is by default.

use unprotected Li-Ion batteries different from those that are stated by default.

Press & Hold

Release while blinking 3 times/sec

OFF

Firefly1

Turbo1

Main3

Firefly2

Main2

Main1

To access the Menu press and hold the switch button (when the flashlight is switched off). It will switch on, go through 6 modes, then

after 2sec in Turbo1 mode – enter to Menu and flash about 3 times a second.

Now you can specify the battery type:

1 click for AA (Tiara A1 Pro) / CR123A (Tiara C1 Pro).

2 clicks for 14500 Li-Ion (Tiara A1 Pro) / 18350 Li-Ion or RCR123 Li-Ion (Tiara C1 Pro).

After the choice is made the light will flash 1 or 2 times to show the battery type chosen.

To use the head mount with the flashlight:

Put in the band in the first clasp.

Pass the end of the band through the second clasp and fix it.

Items included in the package:

1 - Flashlight

6 - 2 spare O-rings

2 - Clip

7 - Magnet

3 - Lanyard

8 - Plastic holder

4 - Headband

9 - User manual

5 - Hand band

To set/replace batteries:

1. Unscrew the tailcap.

2. Place the batteries with the positive contact (+) facing the

head of the flashlight.

3. Adjust the tailcap and tighten it as far as it can go.

The flashlight is ready for operation.

Do not specify the type of power source manually unless you

Click x1 or x2

1xAA or

1xCR123A

1x14500 Li-Ion or

1x 18350 Li-Ion /

1x RCR123 Li-Ion

Put in the band through the slots in the plastic holder

and fix the flashlight. Adjust elastic band to the size

of your head.

Operation

Main

Click x2

Press & Hold

Main вFirefly

Main1 вMain2

Any State

Main

Main3

Firefly

Click x2

Press & Hold

Firefly

OFF вFirefly1

гд

Firefly1

Main

гд

Firefly2

Turbo

Click x3

Press & Hold

Any State

Turbo1

вTurbo

гд

Turbo2

Strobe

Click x4

Press & Hold

Any State вStrobe

Strobe1 в Strobe2

Strobe3

Multicolor Voltage Indication

< 100%

< 75%

5sec

Warning Indication

Warning

Critical

2sec

1sec

< 25%

< 10%

The flashlight has 4 Sections of modes:

[Section1] – Firefly modes

[Section2] – Main modes

[Section3] – Turbo modes

[Section4] – Special modes

In OFF state:

Click: To turn on the last used mode.

Press and hold: To turn on Firefly1 mode in [Section 1].

In ON state:

Click: To turn off the flashlight.

Press and hold: To start cycling through the modes of actual

Section.

The same in OFF & ON states:

2 clicks: To turn on the Main mode [Section 2]. Then double

clicks will switch modes between chosen modes in

[Section 1] and [Section 2].

3 clicks: To turn on Turbo mode [Section 3].

4 clicks: To turn on Strobe mode [Section 4].

Automemorizing. After switching off the last used Mode is

memorized for quick 1-click access at next switching on.

Lock-out function. Unscrew the tailcap to 1/4 for the

protection from accidental switching on. State Indication will

be turned off.

Constant light. Powerful electronics provide constant

brightness even in the Turbo1 mode, using all energy of the

battery. And the Turbo2 mode gives the maximum

brightness as the Overboost technology in cars, but until

discharge current of the battery don't exceed critical values.

Digital Light Stabilization & Safe Soft-Start System monitors

battery voltage, starts the flashlight at an admissible

brightness or decreases it by steps when the voltage

dramatically fall down. These actions increase runtime, use

all available energy, get longer lifetime of rechargeable

battery and protect it from overdischarge or overheating.

Multicolor Voltage Indication. Shows the battery level by

short flashes every 5 seconds. There is no Voltage Indication

in OFF state and Firefly modes.

Warning Indication – Low Battery Level.

When it is < 25%, the color LED will show the warning level –

flashing in orange color once in 2 second. With a further

voltage reducing brightness will start to decrease in steps for

safety of the battery and user. If brightness will be <25%

from nominal value, the main LED will flash 2 times. Critical

battery level <10% is red indicated once a second.