- ページ 2

カー・ステレオ・システム Discount Car Stereo A2D-CDR30のPDF クイック・スタート・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Discount Car Stereo A2D-CDR30 7 ページ。 Musicstreaming for porsche cdr30/31 radios
Discount Car Stereo A2D-CDR30 にも：クイック・スタート・インストール・マニュアル (5 ページ)

ページを印刷する

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY



This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.



We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage



Requirements:

cDr30 or CDR31 radio

Introduction

Porsche base radios (e.g., CDR30 and CDR31) may include optional 3.5mm AUX

jack and/or Bluetooth Hands-Free kit; which does not support music streaming

(A2DP). If looking to avoid wires dangling from the dash and support for more

attractive modern media formats, consider our A2D-CDR30 Bluetooth music

streaming add-on. This module supports any A2DP enabled Smartphone, Tablet,

Kindle etc. Once installed users pair device and wirelessly stream Apple music,

Pandora, turn by turn directions and more.

jack (if so equipped) and also works in vehicles with or without factory Hands-

Free.

FYI:

Factory Hands-free option does not support streaming profile.

See Frequently Asked question at the end of this guide for more details.

Installation

Radio removal required to gain access to connectors. For radio removal

here

for radio removal instructions.

instructions click

If present, disconnect 12-pin GREEN plug from radio main Quadlock (See

Fig. 1) --- To disconnect, simply press release tab.

The A2D-CDR30 replaces factory AUX

Radio Quadlock

2. Connect adapter 12-pin BLACK plug to vacated slot from step 1 (See Fig. 2)

Factory Green plug (if present) remains disconnected

3. Secure ground wire to radio chassis as seen in Fig. 3

Use chassis screw to secure ground or connect to alternate ground source.

Fig. 1

Fig. 2

(See Fig. 2)