バッテリーチャージャー Armytek Handy C1 ProのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Armytek Handy C1 Pro 2 ページ。 Portable charger with powerbank function

THE MOST TECHNICALLY ADVANCED

Portable charger with Powerbank function

Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.

Please read this manual carefully before using the product.

1. Install cable into Micro-USB socket of the charger.

2. Place Li-Ion, IMR, Ni-MH, Ni-Cd battery with the positive

contact (+) facing the top of the charger. All LEDs will show

the charge current at the start: green - 0.5A, red - 1A.

Constant 4 red lights after 15 minutes of charge: you could try again the charging, but we suggest to

change this battery.

>0%

>25% >50% >75%

To start the powerbank function connect the charger to

your device with the cable, then install a Li-Ion battery.

>75%

>50%

We DO NOT RECOMMEND to leave batteries inside the charger for a long storage period, as batteries can leak

for various reasons and damage the inner parts of the charger. If you have noticed any signs of batteries'

defects then withdraw them from the charger and utilize.

Handy C1 Pro

USER MANUAL

Charging

Finished

Powerbank function

>25%

>3%

Always you can see an actual charge

level. Green light blinking shows

which charge stage is going:

>0%, >25%, >50% or >75%.

If the charge is finished then all LEDs

will stay green and stop blinking.

>0%

The orange LEDs show current battery

level: >75%, >50%, >25% or >3%.

If the battery level is less than 3%

the orange LED will start blinking.