- ページ 2
カー・ステレオ・システム Discount Car Stereo A2D-SRXのPDF クイック・スタート・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Discount Car Stereo A2D-SRX 6 ページ。 For cadillac 2003-06 srx with navigation & xm tuner module
PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This document is provided as a GENERAL installation guide, some vehicles vary and may
require additional steps. We do not accept responsibility for third party labor charges or
modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
Careless installation and operation can result in equipment damage
•
Introduction:
Are you looking to stream music application in your 1
Navigation radio and XM tuner module? Our A2D-SRX Bluetooth module, allows
these vehicles owners to stream music applications (e.g., Pandora, Apple Music,
SiriusXM, Spotify etc.) from Smartphone, Tablet, Kindle etc. through the
Navigation radio XM port. A wireless connection means no wires, clutter or
complicated setup. The two requirements for this module to work are:
1. Navigation radio
2. XM Tuner Module (with or without subscription).
If XM subscription is active, select "Subscribed", if expired, select "Not
subscribed"; however,
if not currently subscribed but plan to renew in the
future, select "Subscribed" otherwise XM will not play upon activation.
To verify vehicle has required XM Tuner Module; press radio "BAND" button. If
XM1/2 softkeys is available (not grayed out), vehicle has required XM Tuner
Module and compatible with the A2D-SRX.
See Frequently Asked question at the end of this guide for details.
Installation:
Navigation radio must be removed from dashboard to gain access to connectors.
Using a panel removal tool, unclip and remove the top A/C vents panel
1.
(See Fig. 1)
.
st
Generation SRX with
Fig. 1
Open ash tray and remove tray. Extract (1) 9/32" (7mm) screw from
2.
tray cavity.
Using panel removal tool, unclip and remove A/C control/ash tray
3.
assembly below radio (See Fig. 2)
Fig. 2
Remove (4) 10mm bolts securing radio to the dash (See Fig. 3)
4.