- ページ 2

自動車アクセサリー Discount Car Stereo A2D-C5FMのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Discount Car Stereo A2D-C5FM 5 ページ。 Music streaming module for 1997-04 corvette

ページを印刷する

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY



This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.



We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.



Careless installation and operation can result in equipment damage

Requirement

1997--04 Corvette factory radio

Introduction

With Bluetooth technology and a Smartphone; C5 Corvette radios without

dedicated AUX port are able to stream applications on the car speakers thanks

to the A2D-C5FM. The A2D-C5FM kit is designed to install in line with the radio FM

antenna using the included antenna adapter kit. The A2D-C5FM works through

the FM band and does not interfere with normal radio operation nor other

factory options. This is an FM modulation kit which differs from FM transmitters

as the later tends to produce additional interference. Installation is a simple

plug-n-play affair and is hidden behind the dash. Although this may not be the

"perfect" audio solution, it's the best solution we currently offer for C5 owners

without CD changers.

Installation-

To radio

This module is installed behind radio cavity.

The PXHGM4 installation harness (included) allows the A2D-

C5FM to connect behind the dash. Radio removal required for

this install. This kit does not connect in trunk/hatch.

Click links below for radio removal video)

Radio removal required. (

https://www.youtube.com/watch?v=Gcrlufo1ctc

https://www.youtube.com/watch?v=WTbWYNJTSDs

Locate radio 20-pin plug, press black release tab to disconnect (See

Fig. 1)

Fig. 1

2. Connect 20-pin plug from step 1, to matting socket (white) on

installation harness (See Fig. 2).

Fig. 2

harness

3. Connect installation harness 20-pin black/gray plug (See Fig. 2) to

radio 20-pin socket vacated in step 1

4. Disconnect factory antenna plug from radio socket (See Fig. 3)

Fig. 3