- ページ 2

カーレシーバー Discount Car Stereo A2D-MBFMのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Discount Car Stereo A2D-MBFM 5 ページ。

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

This installation guide is provided as a GENERAL installation guide, some vehicles vary and may



require additional steps. We do not accept responsibility for third party labor charges or

modifications. Exercise due-diligence when installing this product.

We do not accept any responsibility for vehicle damage or personal injury resulting from the



installation of this product.

Careless installation and operation can result in equipment damage



Requirement

Mercedes BENZ RADIOS WITH FM BAND

Introduction

With Bluetooth technology and a Smartphone; Mercedes Benz radios without

dedicated AUX port (e.g., 1999-Up digital fiber radios etc.) are able to stream

applications on the car speakers thanks to the A2D-MBFM. The A2D-MBFM kit is

designed to install in line with the radio antenna using the included antenna adapter

kit: ISO (older radios) and FAKRA (newer radios). If uncertain about which antenna

adapter is requires by your radio; please

ordering. The A2D-MBFM works on any Mercedes Benz FM Band radio and does not

interfere with normal radio operation or the operation of existing factory options.

Installation

Radio must be removed from dash to gain access to connectors. Removal tools (See

Fig. 1) required and must be purchased separately. Mercedes

Double DIN radios do not require tools for removal. Special removal instruction

available upon required.

Slide both tools into radio slots to detent position, (Straight edge facing out) and

withdraw by pulling outwards. (See Fig. 2)

Click

here

for additional radio removal instructions.

email us

a picture of the radio face prior to

Disconnect factory antenna terminal from radio socket (See Fig. 3)

radio antenna terminal

Connect factory antenna terminal (from step2) to antenna socket marked

"TO ANTENNA" in Fig. 4

Fig. 1

tools

Fig. 2

radio

Fig. 3