- ページ 2
カーレシーバー Discount Car Stereo A2DIY-C5CDのPDF クイック・スタート・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Discount Car Stereo A2DIY-C5CD 10 ページ。 Bluetooth kit for 1994-07 corvette
Discount Car Stereo A2DIY-C5CD にも： インストレーション・マニュアル (10 ページ), クイック・スタート・インストール・マニュアル (10 ページ)
ページを印刷する
PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
Careless installation and operation can result in equipment damage
•
Click
here
if installing older push button version
Requirement
Functioning 12-disc changer in trunk or hatch
Introduction:
If looking to add Bluetooth features to your American classic with trunk/hatch
mounted 12-disc changer should consider the A2DIY-C5CD Kit. This revised
easy to install kit is essential to adding Bluetooth features to the C5 radio.
This module sounds great for mobile conversations, streaming Pandora, Sirius
radio, Apple music, audiobook, podcast and more. The included media button
(remote) can be mounted on dashboard or steering wheel to adjust volume,
track selection and more. In addition, an optional USB charging port is available
to keep devices charged while on the road. Thanks to the A2DIY-C5CD kit users
keep the radio and CD changer while enjoying Bluetooth features only
available on newer cars.
Warning:
A functioning 12-disc changer required for module to work.
If vehicle does not have one or if malfunctions; this module will not work.
See Frequently Asked question at the end of this guide for more details.
Installation
Remove radio from dash to gain access to connectors.
https://www.youtube.com/watch?v=WTbWYNJTSDs
1.
.
2. Connect factory 20-pin plug to installation harness 20-pin connector
(connects at radio)
Locate and disconnect factory 20-pin plug from radio as seen in Fig. 1
Fig. 1
radio connector
(white) See Fig. 2
Fig. 2
Fig. 3
installation harness
Click link below