- ページ 2

カーレシーバー Discount Car Stereo AUX-GM3のPDF クイック・スタート・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Discount Car Stereo AUX-GM3 4 ページ。 Gm class ii radios with external cd 6-disc changer, xm tuner or rse

ページを印刷する

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

•

This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.

•

We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage

•

Requirements:

External cd changer, XM Tuner module or rSE

Introduction

Thousands of GM cars, trucks and SUV's have either a remote/external CD

changer, XM tuner (U2K option) or RSE (DVD) but lack aux input jacks for

Smartphone, iPod, MP3 player etc. Many of the available adapters require

disconnecting XM,

remote CD changer*, DVD

auxiliary input jack, requires and retains these factory options to provide a

3.5mm input jack which can be used to connect and play all kinds of audio

devices including Smartphones, MP3 Players, iPods etc. Keep in mind for the

AUX-GM3 to work, the vehicle MUST have an XM Tuner module (U2K option)

or Remote/External CD changer or DVD player. (at least one of these

options must be present for the AUX-GM3 to work)

Warning: The 6-Disc changer built-into the AM/FM radio, is internal and not

considered separate or remote. Also, XM tuner module (U2K option) is a metal

box that is also not built-into the AM/FM radio.

See Frequently Asked question at the end of this guide for additional details.

or all three; however, the AUX-GM3

Installation

Radio removal required. Vehicle specific radio removal instructions are not part

of this guide, but are available upon request

Locate and disconnect 12-pin plug from radio by pressing lock tab (See

Fig. 1)

Alert: If AM/FM radio 12-pin port is empty; vehicle does not have required

factory option for the AUX-GM3 to work. No need to proceed with install.

2. Connect vehicle 12-pin plug (from step 1) to 12-pin connector on

harness (See Fig. 2)

harness 12-pin connector

Fig. 1

Fig. 2