- ページ 2

カーレシーバー Discount Car Stereo BLU-GM1のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Discount Car Stereo BLU-GM1 7 ページ。 Bluetooth music streaming for select 1995-05 gm radios

ページを印刷する

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

This installation guide is provided as a GENERAL installation guide, some vehicles vary and

▪

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.

We do not accept any responsibility for vehicle damage or personal injury resulting from

▪

the installation of this product.

▪

Careless installation and operation can result in equipment damage

Requirement

1995-05 with AM/FM/TAPE RADIOS and 2000-05 With AM/FM/CD RADIOS

Introduction

If you drive an older GM car, truck or Van that still has the original radio and

looking to upgrade to music steaming; the BLU-GM1 is for you! The BLU-GM1

streaming module works on select 1995-05 GM radios with CD changer controls

and replaces separate/slave or remote player (if present). A wireless

connection means no wires, clutter or complicated setup. All the user has to do

is connect module to radio 9-pin port, pair Smartphone, Tablet etc. and enjoy

tons of applications including Pandora, Apple music and more on the car system.

Optional smart remote: Allow users to control select smartphone functions

while keeping eyes on the road. (See details on page 3)

See Frequently Asked question at the end of this guide for details.

Compatible with 2000-05 radios with "CD/AUX" button on

faceplate.

1995-99 radios with "CD/AUX" button on

faceplate are NOT

Compatible with 1995-05 radios with "AUX/TAPE "button

on faceplate.

compatible.

Installation

Remove factory radio from dash (Vehicle specific radio removal

procedure is not part of this guide but may available upon request)

If present, disconnect factory 9-pin plug from radio – See Fig. 1

Connect installation harness 9-pin plug (See Fig. 2) to radio 9-pin port

vacated in step 2 (See Fig.1)

If vehicle has Bose system, connect factory 9-pin plug (removed from

radio in step 2) to installation harness matting 9-in socket (white)—See

Fig, 3

Separate CD, TAPE or CD changer (if present) remains disconnected.

Installation harness 9-pin socket (white) remains empty except in

vehicles with BOSE.

Radio 9-pin port

Fig. 1