- ページ 7

スクーター BLADEZ E-LITE 250のPDF 製品ハンドブックをオンラインで閲覧またはダウンロードできます。BLADEZ E-LITE 250 17 ページ。 Electric power board

BOX CONTENTS

Your Bladez E-LITE should come complete with:

1. Bladez E-Lite 250 ELECTRIC POWERBOARD

2. AC Wall Charger

3. Allen Wrench

4. Instruction Manual and Registration Card

YOUR SCOOTER WILL COME CHARGED OUT OF THE BOX BUT YOU MUST

CHARGE YOUR E-LITE 250 FOR 6-8 HOURS EVEN IF THE LIGHT IS GREEN

PRIOR TO FIRST USE!

Before you Ride

1. The E-Lite is shipped with the Handlebars

unattached.

2. You need to insert the accelerator and

brake levers into the handlebars. To insert,

remove the screws from the handle bar,

then insert the right and left handle and

align the holes. (Fig.1). Then insert the

screws through the holes and tighten the

nuts. (Fig. 2).

*Note: the Accelerator Lever (the one with the

shorter lever) goes on the right, the Brake Lever

goes on the left.

3. Make sure all of the bolts are tightened.

Also make sure to insert the bolts in the

correct way with the nuts on the back side

of the handlebars as in Fig. 2

4. Make sure the tires are inflated to 50 PSI as

tires may lose pressure during shipping. For

information on inflating tires, please refer to

page 10.

Page 7