- ページ 14

スクーター BLADEZ ION 450のPDF ハンドブックをオンラインで閲覧またはダウンロードできます。BLADEZ ION 450 16 ページ。 Electric power board

For regular adjustments:

*Note: Chains that are run excessively dry or loose can result in sprocket teeth

being severely damaged.

CLEANING

Use a soft cloth dampened with warm water to clean your scooter. Do not use a hose or

directly spray the scooter with water as it will damage the electrical equipment and void

your warranty.

1. Using a 17mm wrench, loosen the

axle bolt on the rear wheel. (FIG. 12)

2. While the axle bolt is loose, using a

10mm wrench loosen the tension

bolts behind the rear wheel of the

ION 450 and move the rear wheel

backwards to remove the slack from

the chain. (FIG. 13)

3. Once this is achieved the wheel nuts

must then be relocked into position

and wheel alignment must be

checked (while turning the wheel,

visually check that the area between

the wheel and the frame parts have

clearance).

Page 13