- ページ 7
芝刈り機アクセサリー Cub Cadet 19A20001100のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cub Cadet 19A20001100 8 ページ。 33-inch wide cut grass bag kit
ページを印刷する
Attaching the Chute
5.
Shut the engine off and disconnect spark plug. Pivot the
chute deflector upward. See Fig. 14.
6.
Secure the latch [J] to the side of the chute/grass bag
assembly using the hardware provided.
7.
Place the bottom lip of the chute/grass bag assembly into
the lip on the deck. See Fig. 14.
8.
Place the tab of the chute/grass bag assembly into the
bracket on the deck. See Fig. 14.
9.
Lift chute/grass bag to position hole in chute over stud
on the deck. The bracket on the chute will hold the chute
deflector into an upright position. See Fig. 14.
10.
Push the latch over the bracket on the deck. See Fig. 14.
4
Figure 14
Using the Grass Bag
WARNING:
The operation of any lawn mower can
result in foreign objects being thrown into the eyes,
which can damage your eyes severely. Always wear
safety glasses while operating the mower, or while
performing any adjustments or repairs on it.
1.
Empty the bag when
3/4 full. To remove the grass bag, lift
discharge chute, lift chute/bag assembly from stud and
remove assembly from opening in deck. After the grass
bag assembly has been removed from the mower's deck,
remove the grass bag assembly (along with the hanger rod)
from the right side support.
2.
Unzip the bag and empty.
3.
Zip the bag closed and reinstall entire assembly following
"Attaching the Grass Bag Assembly" above. Check the grass
bag frequently for deterioration and wear. Replace worn
bag with new bag.
1
2
3
5
s
2 — a
& s
-u
ectiOn
sseMbly
et
7
p