- ページ 17

ティラー Cub Cadet 394のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cub Cadet 394 20 ページ。 50" mower deck for series 3000 tractors
Cub Cadet 394 にも：取扱説明書 (16 ページ)

INSTALL NEW SPINDLE BELT

1. Lift the gear box/mounting bracket assembly to

install the belt around the rear of the drive pulley

and through the center opening of the mounting

bracket.

2. Install the gear box mounting bracket on the deck

mounting plate and secure with the original

fasteners removed earlier.

3. Slide the belt underneath the movable flat idler

pulley and route the backside of the belt around

the flat idler pulley.

4. Route the belt as follows:

• around the left spindle pulley

• around the rear of the fixed flat idler pulley

Spindle Pulleys

Movable Flat Idler Pulley

Drive Pulley

Fixed Flat Idler Pulley

Spindle Belt

Idler Bracket

Square Hole In Idler Bracket

Gear Box Mounting Bracket

Mounting Bracket Fasteners

10.

Deck Mounting Plate

Figure 28

• around the front of the center spindle pulley

• to the right spindle pulley

5. After making certain the belt is properly routed

(Refer to Figure 28), insert a 3/8" drive ratchet

into the square hole of the idler bracket.

6. Using the ratchet for leverage, pivot the idler

bracket toward the left side of the deck to loosen

tension and allow the spindle belt to be rolled onto

the right hand spindle pulley.

7. Install the spindle covers and secure with the

original hex washer head screws removed earlier.