- ページ 5

DCドライブ ARNOLD UA 1500のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ARNOLD UA 1500 17 ページ。 Universal drive

4. Inspection intervals

In order to guarantee a permanently high operating safety, a brief inspection shall be

performed prior to each application (see point 2).

The complete drive is a safety relevant component and must, thus, be annually

inspected by a correspondingly trained expert according to the safety-at-work

directive (German directive: BetrSichV 2002) and DGUV directive 17.

This inspection must include the following points:

1. Check for possible damages of the housing

2. Check the eyebolts for damages and tight fit

3. Check the secure connection between upper and lower part. In this

process, particular attention must be paid to possible damages of the

security seal.

4. Check the slings (shackle / chain link and the like)

5. Check the cables, power supply units and plug-in connectors.

An inspection by an expert (e.g. TÜV) is required every 4 years. This inspection may

be carried out by the locally competent TÜV organization.

For the documentation of these cyclic inspections, an inspection book is attached to

every motor. Please consider that you put lives at risk with a defective drive. The

costs of an inspection are low compared to this danger! Please send the drive to the

company ARNOLD Lichttechnik for a more thorough inspection, if there are visible

damages that suggest a limitation of the operating safety (e.g. after a crash of the

drive).

Page 5 of 11

12/2021 REV.19