- ページ 14

メディア・コンバーター Discover Video Mantis EncoderのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Discover Video Mantis Encoder 16 ページ。

Mantis Shelf

The Mantis Shelf can mount up to six

Mantis encoders and provides power

supply and power distribution to the

encoders.

Install the encoders by securing them

with the included screws (two on top, two on the bottom).

Connect power using the included cables from the power distribution

box to each encoder.

Connect each Mantis to your network via Ethernet (you may find it

convenient to use an inexpensive Ethernet switch associated with each

shelf).

Note that it may be difficult to see the MAC address label once the

Mantis is mounted in the shelf. You should copy the MAC

addresses, or mark them on your own visible labels. The MAC

address help you identify each Mantis when using the Mantis IP

finder program.

Use the Mantis IP Finder to locate the Mantis encoders on your

network. The finder must be used on the same network as the

encoders. The discovered encoders will show their MAC addresses to

help you identify the Mantis.

Page 14

Mantis Encoder