- ページ 11

コントロールユニット Blake Water Solutions MOD-SOL1-BWSのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Blake Water Solutions MOD-SOL1-BWS 12 ページ。 Equipment modules

Operation

(Green)

Caution

Status LED's

(Yellow)

Flashing

Comm. LED

Power

Switch

NOTE 1: Not Compatible with MOD-RAM-BWS. The module gets detected as a "Remote Alarm"

on standard output and high output controllers during the start-up sequence.

NOTE 2: The Wireless Range can vary based on the installation environment; objects, walls

and metal obstacles can interfere and degrade the wireless signal. Best suited for residential

applications.

Pairing an Additional Remote Display

To pair an additional Remote Display to a currently installed Transmitter:

Step 1) Power ON the Additional Remote Display within 5m (15ft) proximity to the

transmitter; by simply plugging the AC/DC wall adapter into the Power Port on

the Remote Display and sliding the switch to the ON position.

Step 2) The Remote Display performs self-pairing with the local transmitter. Once paired

the Communication LED on the Remote Display will turn OFF and a Status LED

will turn ON.

Step 3) Once pairing is complete, relocate the Remote Display to any location

Good

No Active Alarms.

Active Minor Alarm, check system for details.

Alarm

Active Major Alarm, check system for details.

(Red)

OFF

Communication is working.

Communication is NOT working.

Remote Display is Out-of-Range

OR controller is powered off.

Remote Display is attempting to pair with a local

transmitter in proximity.

Remote Display Powered ON

Remote Display Powered OFF

Remote Display

, Transmitter is disconnected

9 |

P a g e