- ページ 15

モニター 3D Global DTC133UHLのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。3D Global DTC133UHL 18 ページ。

4 Commissioning

To achieve the best possible results with your system, please observe the following general

instructions:

• The optimum image quality on the display is achieved after a warm-up period of

approx. 20-30 minutes.

• Make sure that your system is positioned so that the display is operated at an angle

of 90° to windows and other light sources in order to avoid reflections on the display.

• Observe the generally applicable or, if applicable, in-house recommendations for the

ergonomic configuration of a workplace also for the installation of this device.

• Keep the system clean at all times and avoid soiling of any kind, especially in the

area of the camera, the screen surface and the operating unit. For instructions on

cleaning, please refer to paragraph 6.1 on page 16.

• Relax your eyes at regular intervals by focusing on a distant real object for some time.

Blink more frequently. Regular breaks are recommended when using the device.

Please follow exactly the sequence and information given here to avoid damage

to the device and injuries during unpacking.

• Open the box.

• Remove the user manual and read it carefully

• Remove the device by grasping it by the housing frame only. Never grasp the device

in the area of the screen surface, as this could cause irreversible damage to the

device and/or injury from glass splinters.

• Attach the device to a suitable stand or display holder. Observe the manufacturer's

instructions for this. The maximum permissible screw-in depth for the VESA mounting

points is listed in the datasheet.

4.3 Installation & Cabeling

• Connect the DisplayPort signal cable to the interface of a suitable system (e.g. PC).

• Connect the USB plug of the head tracking camera to a suitable USB interface of

your system (recommended: min. USB 3.0).

Manual_DTC133UHL_EN

Rev. 1.0 / 17.11.2022

15 / 18