- ページ 16
ビデオゲームコントローラー Cube Controls FormulaのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cube Controls Formula 19 ページ。 Wireless esports racing wheel
Cube Controls Formula にも： ユーザーマニュアル (16 ページ)
ページを印刷する
Adjusting the trimmers
Carefully place a small philips screwdriver inside the screw hole leaved by the screw
you removed in the previous step, and move it slightly until it engages the trimmer.
It sits around 10mm below the surface of the main body.
There is one trimmer for each right (upshift) and left (downshift) paddles.
Press the paddle you are adjusting and keep it pressed, rotate the trimmer slowly
clockwise or anticlockwise until the downshift button (9) or upshift button (10) are
on.
Please notice that the adjustment trimmer have end points on both ends, do
not force the rotation if you reach them.
Release the shifter, remove the screwdriver and check if the shifter is now working
properly. If needed, please, do repeat this process for the other paddle.
Once you are done with the calibration, put back in place the Torx screws you
removed at the beginning.