- ページ 11

ビデオゲームコントローラー Cube Controls Formula eSportsのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cube Controls Formula eSports 16 ページ。

Adjusting the trimmers

Carefully place a small philips screwdriver inside the screw hole leaved by

the screw you removed in the previous step, and move it slightly until it

engages the trimmer. It sits around 10mm below the surface of the main

body.

There is one trimmer for each right (up-shift) and left (down-shift) paddles.

Press the paddle you are adjusting and keep it pressed, rotate the trimmer

slowly clockwise or anticlockwise until the down-shift button (9) or up-shift

button (10) are on.

Please notice that the adjustment trimmer have end points on both

ends, do not force the rotation if you reach them.

Release the shifter, remove the screwdriver and check if the shifter is now

working properly. If needed, please, do repeat this process for the other

paddle.

Once you are done with the calibration, put back in place the Torx screws

you removed at the beginning.