ページを印刷する5 Operation scheme
For adequate usage of the camera and for all possible settings please also read the Software and installati-
on guide. This section only contains details specific to the S185.
RJ 45 NR.1
Plug in the first Ethernet cable into the lower network jack of the camera (JR 45 NR. 1) and into
the Eth1 port of the Cubert Mini-PC server.
Plug in the second Ethernet cable into the upper network jack of the camera (JR 45 NR. 2) and into
the Eth2 port of the Cubert Mini-PC server.
Connect the Y power cable with the Camera and the Cubert Mini-PC server: Connect the M8 3-pin
plug with the respective port of the camera. Connect the second plug into the power supply of the
Cubert Mini-PC server. The third plug is connect with the custom power supply (see chapter 4.1
"power supply")
www.cubert-gmbh.de
RJ 45 NR.2
In order to connect the camera properly, follow these steps:
Power
Power / Ext Trig
Eth2
Antenna
connectors
HDMI
Eth1
USB
8