- ページ 18

ラボラトリー機器 Discovery Labs Warming Cradle 801-000のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Discovery Labs Warming Cradle 801-000 20 ページ。 Dry block heater

Troubleshooting

Problem

LEDs and LCD are

not operational

WARMING CRADLE

does not detect a vial

Damaged WARMING

CRADLE

"Service Required

Immediately" on LCD

with flashing RED LEDs

Make sure WARMING CRADLE is disconnected from the electrical

outlet before performing any cleaning. WARMING CRADLE may be

cleaned with a cloth moistened with clean water or a non–alcohol based

cleaning solution. Avoid splashing water or any liquid onto WARMING

CRADLE. Do not immerse in water.

Warning: If water or any liquid is spilled onto WARMING CRADLE,

disconnect the plug immediately from the electrical outlet and contact

Discovery Laboratories, Inc.

WARMING CRADLE should be calibrated yearly, at minimum, by a

qualified service technician. Contact Discovery Laboratories, Inc. for more

information regarding calibration.

Possible solution

Check that the power cord is connected

properly to WARMING CRADLE

and the cord is properly plugged into

the electrical outlet.

Plug a different piece of equipment into

the electrical outlet to make sure the

electrical outlet is functioning properly.

Clean the vial sensor above the reservoir.

(See "Cleaning and Maintenance"

instructions, below.)

None – Contact Discovery Laboratories, Inc.

for support.

None – WARMING CRADLE is not

serviceable by the user. Contact Discovery

Laboratories, Inc. for support.