- ページ 7

フライヤー Aroma ADF-190AのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aroma ADF-190A 16 ページ。 Stainless steel deep fryer

1. Read all instructions and important safeguards.

2. Remove all packaging materials and make sure items are received in good condition.

3. Tear up and discard all plastic bags as they can pose a risk to children.

4. Wash accessories and inner pot in warm soapy water. Rinse and dry thoroughly. As

pictured in Fig. 2 on page 4 , the heating element can be immersed in water, but never

immerse the Electrical Unit. Dry the heating element thoroughly before use.

5. Wipe the body clean with a damp cloth.

6. Place the deep fryer on a level, stable surface.

Do not use abrasive cleaners or scouring pads.

Do not immerse the appliance in water at any time.

Oil Selection:

1. We recommend the following oils for healthier deep-frying: corn, canola or blended

vegetable oil. These oils are cholesterol-free and low in saturated fat.

2. We do not recommend using peanut oil, soy oil, sun flower oil, or lard that may drip

and deteriorate quickly when heated. Heavy flavored oil such as olive oil should also

be avoided.

3. We do not recommend mixing old and new oil together as this spoils new oil quicker.

4. The number of times that the frying oil can be reused would depend on the food that is

fried in it. For example, when food such as coated fish battered with bread or cracker

crumbs is fried frequently, the oil will need to be replaced more often.

Preheat Oil:

1. Turn the temperature control to the lowest temperature and make sure that the fryer is

unplugged.

2. Wipe dry the Non-Stick Frying Pot and fill it with oil no higher than the MAX Level and

no lower than MIN level.

3. Be sure oil level is no higher then the MAX LINE marked on the pot. Oil level must

always be between the minimum and maximum line marks.

4. Plug the fryer into a wall-outlet and turn on the power using the power switch. The

power switch will illuminate and the indicator light will turn red.

5. Close the lid tightly.

6. Set the temperature control to the desired degree and the fryer will start heating oil.

7. When the oil reaches the desired temperature, the indicator light will turn green.

HOW TO USE