- ページ 8

プリンター 3D Nord magicolor 2300WのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。3D Nord magicolor 2300W 19 ページ。

Setting up Your Printer

WARNING!

Your printer weighs approximately 28 kg (62 lbs) with consumables.

Be sure to have help when lifting and moving it.

Do not plug in the printer until you are told to do so.

We strongly suggest that you save the packaging materials in case

you ever need to move or ship the printer.

Printer (with four toner cartridges and an OPC drum cartridge installed)

Waste toner bottle

Output tray support

Media support for Tray 1

Power cord

Utilities and Documentation CD-ROM

Installation Guide

Interface cables are not included in the shipment. If you need cables, con-

tact your local vendor or computer store.

Use the following instructions to unpack your printer.

Remove the protective plastic cover.

With another person's help, lift the printer from the

carton. Do not tilt the printer in any direction at any

time.

For best output quality and longest consumables

life, place the printer on a hard, flat, level, stable

surface capable of supporting about 37 kg (81 lbs).

Remove the tape and packing materials from the outside of the printer.

Remove the cardboard from Tray 1(the multipurpose tray).

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Setting up Your Printer