- ページ 11
ミュージックペダル CubuSynth VCFAのPDF ビルドマニュアルをオンラインで閲覧またはダウンロードできます。CubuSynth VCFA 14 ページ。 Multimode vcf with lp,hp and bp outputs and integrated vca
CubuSynth VCFA にも： マニュアル (5 ページ)
ページを印刷するCubuSynth VCFA - Build Guide
STEP 13 (control PCB)
Controls
7
3
3
Now take the Potentiometers and jacks and put them in place as
marked on the PCB but don't solder yet.
In the picture you can see the placement.
When everything is in place, take the front panel and put it on top,
so all controls go into each corresponding hole of the panel. "wiggle"
the front panel into place and make sure everything fits well.
Fit all nuts to the Potentiometers and the Jacks.
Be careful when turning the boards around, so that all the
components stay in place.
Then solder everything.
Page 11
PJ-301M
IN1,CVR1,CV1,ACV1,J3,J2,J1
100K
FREQ,GAIN,RESO
100K
CVA,FCV,RCV,
PCB V1.2 Sept 2022