- ページ 8
音楽機材 CubuSynth Dual CS-20 VCFのPDF ビルドマニュアルをオンラインで閲覧またはダウンロードできます。CubuSynth Dual CS-20 VCF 16 ページ。 Dual / stereo multimode vcf with self-oscillating resonance and intuitive routing and cv modulation matrix
CubuSynth Dual CS-20 VCF にも： マニュアル (9 ページ)
ページを印刷するCubuSynth Dual CS-20 VCF - Build Guide
STEP 9 (Main PCB)
Transistors
6
2N3906
Take the 2N3906 transistors, put them in place and make
sure the orientation is correct. The outline of the
transistor has to match with the silkscreen on the PCB
like shown in the picture.
They will stand off the PCB by around 1-2mm. Do not try
to push them all the way down.
Then turn around the board an solder.
STEP 10 (Main PCB)
1uf Electrolytic capacitors
2
1u
Place the two 1uf capacitors on the PCB with the white line on the capacitor facing towards the
white mark on the PCB. The longer leg of the capacitor goes through the hole marked with "+"
Page 8
Q6,Q5,Q4,Q3,Q2,Q1
C8,C1
PCB V1.4 Mar 2023