- ページ 3

DVR Dish Network Hopper JoeyのPDF システムの起動とセットアップをオンラインで閲覧またはダウンロードできます。Dish Network Hopper Joey 4 ページ。

Hopper Joey System Activation and Setup

.not

Issue: Pairing remotes in multiple Hopper installations.

Issue: Toggle switch on the Hopper Internet Connector (HIC).

Issue: Can't communicate between Hoppers.

Issue: Joeys show "Not Connected" to broadband in box C of the

System Info screen, even though the Hopper is connected with an

Ethernet cable or Wireless Adapter.

Issue: Error 023; DVR features not available after activation.

Issue: Unable to customize room names while in the install wizard.

Issue: Unable to read satellite signal at the Hopper location.

Issue: Installing multiple Hoppers and Joeys simultaneously.

Issue: Location for the HIC when using the HIC and the Joey in the

same location.

Issue/FAQ

Resolution

Complete the installation wizard for one Hopper before starting the

installation wizard on other Hoppers. This prevents pairing remotes to

multiple or incorrect Hoppers.

The toggle switch is used for diagnostics only; it should not be moved or

adjusted during installation or by customers.

At launch, multiple Hoppers will not be able to share DVR content or

broadband connectivity.

Even though the Joeys show up as "Not Connected," broadband features

such as Blockbuster @Home will be available since the connected

Hopper provides connectivity to the entire system.

EPG takes up to 10-15 minutes to download after activation. The red

shortcut button on the remote displays the EPG download status. If Error

023 still displays after the EPG download disappears, reset the Hopper.

This function is not available while in the install wizard as of launch. To

customize room names, access Remote Manager after setup.

Bypass the Node by barreling the satellite feed and host line; then check

satellite signal.

Starting with one Hopper, complete the installation wizards one at a time

before starting another Hopper or Joey.

To ensure proper ventilation of hardware it is important to place the HIC

and Joey in a well ventilated area. It is recommended to install the Joey

upright in the stand to allow ventilation from both sides of the Joey. If

the Joey must be installed horizontally, do NOT stack anything (e.g.

HIC) on top of the Joey to help prevent it from over heating.

Ver. 032312 Page 3 of 4