- ページ 2
アクセサリー Aroma360 VanGogh360のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Aroma360 VanGogh360 2 ページ。
Aroma360 VanGogh360 にも： 使用方法 (4 ページ), 使用方法 (4 ページ), トラブルシューティングマニュアル (2 ページ)
ページを印刷する
At a Glance
POWER — The button to the right underneath the LCD screen is used to turn
the VanGogh360 on and o .
FAN — The button to the left underneath the LCD screen controls the fan. Use
the di user with the fan on to cover a larger area.
LOCK SETTINGS — If you want to lock the settings to prevent tampering, hold
down the SET button for 20 seconds. This will prevent anyone from adjusting
the settings on the unit. You will hear a beep that confirms the settings have
been locked. Repeat to unlock the settings. You will need to unlock the unit to
adjust the settings.
FACTORY RESET — If you want to reset the unit to factory settings, hold down
the MODE button for 20 seconds and the unit will return to the following
settings: 8a.m. – 10p.m., seven days a week.
HVAC CONNECTION — Your VanGogh360 can also be used in conjunction
with the central air conditioning system.
Understanding Your VanGogh360
The VanGogh360's LCD display provides valuable information about your
settings. Here is a quick guide on what each item means.
WORK vs PAUSE — When the unit is in WORK mode, it is emitting aroma.
When the unit is in PAUSE mode, it is not emitting aroma.
TIME — The number displayed on the unit should represent the current time,
using the 24-hour clock.
DAY OF THE WEEK — The VanGogh360 allows you to have di erent settings
for the days of the week. The day that's shown on the display should be the
current day.
SCENT/WORK/PAUSE — This screen appears when adjusting the scenting
strength.
What's included:
• The VanGogh360 Di user Unit
• 500 mL Aluminum Bottle
• 12V Power Cord
• HVAC Transparent Tubing
• Wall Mounting Brackets
• Spare Nozzle
• External HVAC Connector
• Two Small Keys
Setting Up Your VanGogh360
1
Unbox your new VanGogh360 and familiarize yourself with the parts and
accessories.
2
Insert the adapter in the VanGogh360's power source and plug the adapter
into an outlet. Press the power button located on the left side of the di user
to turn it on.
Now that the di user is powered on, you may begin adjusting the settings to
your liking. By default, the LCD screen will depict the current time. Note the
unit uses a 24-hour clock so 5:30p.m. will be shown as 17:30.
Setting the Current Time
1
To set the current time, press SET and the hour will flash. Press UP or
DOWN to adjust to the current hour and press set to confirm your choice. (If
your screen is unresponsive, press and hold the SET button for 20 seconds).
2
The minutes will now be flashing. Press UP or DOWN to adjust to the current
minute and press SET to confirm your choice.
3
The day of the week will now be flashing. Press UP or DOWN to adjust to the
current day of the week and press SET to confirm.
Setting the Operating Hours
Now it's time to set your event operating periods. The VanGogh360 allows up
to five individual event operating periods so you can scent at various times on
di erent days of the week.
1
To set the start time of an operating period: Press MODE. EVENT 1 ON will
appear. This represents the On Time for the first working period. Set time
as instructed above.
2
To set the operating days: Press UP or DOWN. The days of the week will
begin to flash. Select the days you wish to apply the working hours to.
Once the desired days have been selected, press SET to confirm.
3
To set the end time of the operating period: Press MODE. EVENT 1 OFF
will appear. This represents the O Time for the first operating period.
Press UP or DOWN to adjust the hour, press SET to confirm. Repeat to set
the minutes.
4
Repeat these steps to set Events 2-5, if need be.
•
Ensure there are no conflicting settings.
The unit cannot be set to run past midnight. You must split the setting
•
between two di erent working periods. For example:
i. EVENT 1 ON — 22:00 EVENT 1 OFF — 23:59
ii. EVENT 2 ON — 00:01 EVENT 2 OFF — 04:00
How to Adjust the Scent Intensity
1
Press MODE and the display will show SCENT WORK PAUSE. This is where
you will adjust the scent intensity for EVENT 1. You can set it between 5%
and 95% (with 5% being the lowest setting and 95% being the highest
setting). Press SET to confirm the intensity.
2
Once you have the desired scent intensity, press MODE and EVENT 2 ON
will appear. This will allow you to set the On Time for the second and
remaining operating periods. If you only have one operating period, then
press MODE until you reach the end of the event settings.
Wall Mounting the VanGogh360
In the wall-mounting kit, you'll find the necessary tools to a ix your di user
to the wall.
1
Unscrew the wall-mounting plate from the back of the di user.
2
Use the wall-mounting plate and a marker to make screw points on the wall.
Use the provided green screws in the screw points.
3
Latch the wall mounting plate over the screws and use the black screws to
a ix the plate. With the plate secured, use the hooks on the side of the plate
to secure the di user. Tighten the screws on the side of the di user.