- ページ 7

モニター DISPLAYLITE DST-4600TのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DISPLAYLITE DST-4600T 10 ページ。 Capacitive touch table

ページを印刷する

III Connection: Media Player, PC or Similar

Mini PCs, Android boxes and other devices can be connected to operate the table.

These devices are not included with the product and must be purchased separately.

Users should also refer to the device's manual during installation.

Assembly

USB

Plates

PC Tray

Power Port

HDMI Port

Touch USB Port

Table

PC Tray

To install the PC or operating device, first remove

the table's PC Tray. The PC Tray must be removed

in order to access the device power supply and

connection ports. Remove the PC Tray screw and

slide the Tray toward the end of the table to release

the tray's hooks from the table's grooves. 2 holes are

provided for optional chassis mount USB cables.

These holes are covered but can be exposed by

removing the USB plates shown in the diagram. The

USB cables are not supplied.

Connect the device's power cable to the Power Port.

Connect the device's HDMI output to the HDMI Port

for video and audio transmission. Connect one of the

device's USB ports to the Touch USB Port for touch

input communication. Set your Media Player, PC or

similar to auto power on when mains power is applied.

After connecting the device cables, re-attach the PC

Tray to store the device and cables. With the device

and cables resting in the tray:

A - Raise the PC Tray hooks into the grooves

and slide inward.

B - Secure using the PC Tray Screw.

II Preparation

Before unpacking the product, familiarize yourself with the product components and layout.

After Unpacking the Display (Section 4), confirm that all components were received and are

free of damage.

1. Components

Contact your customer service center if any components are missing.

The images below may differ from the components you receive.

Main Box

Smart Display (1EA)

UK Power, EU Power,

USB, HDMI (1EA)

Leg Box

Table Legs (4EA)

Leg Braces (4EA)

1A, 1B, 2A, 2B

Screw "A"

Screw "B"

PH M4x10 SEMS

FH, M5x12

FH, M3x12

(8EA)

(32EA)

QUICK START GUIDE - VER. 1.0

SAFETY GUIDE - VER. 1.0

Quick Start Guide

Safety Guide

Leg Plate (2EA)

1, 2

Screw "C"

Acrylic Finishing Strips (4EA)

(10EA)