- ページ 6

3Dプリンター 3D Systems ProJet 5500XのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。3D Systems ProJet 5500X 13 ページ。

8/11/22, 10:07 AM

Install Material Bottles

1. For the purpose of the

bottles of

part

2. Unpack the

sleeves and material carton to store partially used material bottles.

3. Press and release the upper left

support material

the top of the material bottle until you hear a click to make certain the bottles are fully seated.

4. Press and release the upper right

part material into the MDM. Pull

top of the material bottle until you hear a click to make certain the bottles are fully seated.

5. As previously stated, only

build jobs will require all MDMs to be fully loaded with both support and part material.

Install Build Platform

Clean

the platform using

Open

the chamber door.

infocenter.3dsystems.com/projetmjp5500x/print/book/export/html/966

Demo

print, we will use only two bottles of

material. Make certain that the two bottles of part material are the same type.

material bottles

and the Global Health and Safety (GHS) Sheet from cartons. Save

material delivery module

into the MDM. Pull levers up and place bottle down into the holder. Press on

material delivery module

levers

two MDM

isopropyl alcohol

Quick Start Guide

to open it. Install two bottles of

up and place bottle down into the holder. Press on the

are loaded with material for the

before installing the

support material

to open it. Install two bottles of

Demo

print. Subsequent

platform

into the printer.

and two

6/13