- ページ 2
モニター DisplayTen DTenのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。DisplayTen DTen 2 ページ。 Wireless display 70”
ページを印刷するSimple troubleshooting
DTEN fails to work normally
1.Check whether there are other objects between remote control and television remote control receiving
Remote control
window, thus leading to failure of remote control.
failure
2.Check whether the battery electrode in the remote control is correct.
3.Check whether remote control needs to replace battery.
1.Whether set sleep or not.
Machine automatically
2.Check whether there is sudden power outage.
shut down
3.Check whether there is no signal automatic shutdown.
PC mode
1.Check whether display is set correctly.
2.Check whether resolution is the best resolution.
Signal out of range
3.Adjust line and field synchronization in menu.
1.Select automatic correction in menu.
Background has vertical
lines or streaks
2.Adjust clock and phase position in menu.
1.Check whether VGA is not well connected or has quality problem.
Image lack of color,
color is incorrect
2.Adjust chromaticity and brightness or contrast in menu.
1.Select automatic correction in menu.
Display format that is
not supported
2.Adjust clock and phase position in menu.
Touch Function
1.Check whether touch driver is installed and started.
Touch function invaild
2.Check whether the size of article touched is comparable with finger.
1.Check whether driver is properly installed and make correction.
Touch positioning not
correct
2.Check whether touch pen is facing the screen.
Video function can't work normally
1.Check whether the machine is started state.
No picture and no sound
2.Check whether signal wire is well plugged, whether INPUT is corresponding to it.
3.If in internal computer mode, check whether internal computer is started.
1.Check whether signal wire is well connected.
With horizontal or vertical
stripes or image dithering
2.Check whether other electronic equipment or power tools are placed around the machine.
1.Adjust chromaticity and brightness or contrast in menu.
No color, color is weak
or image is weak
2.Check whether signal wire is well connected.
Audio function can't work normally
1.Check whether mute button is pressed for mute.
With image but without
2.Press VOL. + / - to adjust volume.
sound
3.Check whether audio line is connected correctly.
1.Adjust sound balance in menu.
Only one speaker has
2.Check whether computer sound control panel only sets up one sound channel.
sound
3.Check whether audio line is connected correctly.
VGA output without
1.Check whether connect external device with headphone cable.
sound
www.DisplayTen.com
+1 (866) 936-DTEN
Safety Warning
Placement
Do not place the unit on an unstable cart, stand, tripod, bracket, table, or shelf.
Do not expose the unit to direct sunlight and other sources of heat.
Do not put the unit near appliances that generate magnetic fields.
Do not handle liquids near or on the unit.
Never spill liquid of any kind into the unit
Do not put heavy objects on top of the unit.
Power Supply
Check that the unit's operating voltage is identical with the your local power supply
Please unplug power supply and aerial plug when
Please unplug power supply, when there is nobody at home or don't use over a long period of time .
Please keep power cord from physical or mechanical damage.
Please use exclusive power cord, don't modify or lengthen it.
Please check and ensure AC source is connected with the ground.
LED Screen
Never use any other hard or sharp object to replace the written pen.
Unplug the power supply before cleaning.
Clean the screen with a soft , dustless and dry cloth.
Never use water or the spray type detergent to clean the unit.
For deep clean, contact an authorized service center.
Please don't display the high brightness image on the screen for a long time.
Sight Distance
The best distance between audience and screen is 5-7 times that of screen diagonal length.
The best watching angle between audience and screen as top and bottom, or so inside 176 degrees.
Temperature
Do not place the unit near or over a radiator or a heater register.
If your unit is suddenly moved from a cold to a warm place, unplug the power cord for at least
two hours to let that moisture may have formed inside the unit can dry completely.
Normal operating temperature is 0 ~ 40
Humidity
Do not expose the unit in rain, damp or place near water .
Ensure the indoor / inner environment drying and cool.Nomal operating humidity is 10~90%.
* Subject to change without notice
www.DisplayTen.com
.
the weather is thunder-storm or lightning.
+1 (866) 936-DTEN