- ページ 9
歯科医療機器 dispomed Highdent intro+のPDF マニュアルをオンラインで閲覧またはダウンロードできます。dispomed Highdent intro+ 20 ページ。
ページを印刷するRECEIVING, ASSEMBLY AND START-UP
INSTRUCTIONS.
9
Connect the other end of the power line from the
head assembly. Connect power cord from bottom of
terminal strip to appropriate electrical outlet.
11
The gauge should indicate between 80 psi (5.5
bar) and 120 psi (8.3 bar) once compressor has
stopped.
805-0260-250
10
Turn compressor on. (On units equipped with oil
compressor the switch is near the pressure gauge at
the back of the compressor).
12
If using another air source check for supply pressure
of approximately 80 psi (5.5 bar) at source.
by par Dispomed
9