- ページ 15

グラインダー ABBOTT & ASHBY 808438のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。ABBOTT & ASHBY 808438 20 ページ。 Linisher

MOUNTING:

The grinder can be secured with screws or nuts and bolts to a workbench or pedestal

stand. The length of the fasteners will depend on the thickness of the work surface. Where

a steel bench is used it is best to mount the grinder to a board, then attach the board to the

bench as this will also minimise vibration.

SWITCHING ON AND OFF:

Before connecting to the power supply rotate the wheel by hand to ensure that it is running

free from obstruction. Connect to the mains supply and press the rocker switch to the ON

position (l). To stop the machine simply press the rocker switch to the OFF position (O).

We also recommend the use of the E-Stop switch ATPED-ESTOP (sold separately)

REPLACING GRINDING WHEEL:

Remove guard by untightening 3 x 6 x 10mm cap screws. Remove 16mm nut and replace

wheel. Choose the correct grit to suit your application. Hand spin the wheel to ensure it

spins freely and true. Reinstall guards.

Abbott & Ashby Linisher Installation Manual

WORKING ANGLE ADJUSTMENT:

Loosen the bolt (A) out of the locking position and lift latch

(B) to disengage the locking teeth (C); rotate the linisher to

the desired angle. Lock the latch back into place firmly into

the locking teeth and fasten the bolt to secure the linisher

into position.

GUARD:

Designed for user ease when changing belts or servicing the

unit. No need to remove other components in order to

remove the guard. Loosen 3 x cap screw (A), rotate the guard

slightly and remove.