- ページ 6

コントロールパネル Abbra Home ControlのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Abbra Home Control 8 ページ。 For abbra home control; abbra campus; abbralink
Abbra Home Control にも：クイック・スタート・マニュアル (20 ページ)

ページを印刷する

your system is activated in the AWAY

mode, an alert will be triggered and the

siren will sound. You can change both

these settings later if you desire.

Quick and easy press and stick

mount: You can install Movement

Detectors either by fixing with adhesive

tape or by screwing to the mounting

surface. Note that the adhesive tape is

very strong. Simply peel the tape and

press on the device, then press in place

at the location of your choice. The bond

will strengthen over time, and set

completely after 72 hours. To attach with

screws, you must open the Motion

Sensor and remove the circuit board.

Remove the circuit board by gently

flexing the catch at the top of the board

out towards the top of the housing.

Use the casing to mark the drill holes.

Insert wall mollies and screw case to

wall. Replace circuit board and cover.

Installing the Keychain Remote

Control

The Keychain Remote Control is

supplied with the battery already installed

and is pre-programmed as USER 1.

Press the STAR button. Check that

the Keychain Remote Control LED

flashes and that the Control Panel gives

an audible confirmation.

Press ON and ON Home together to send an

Emergency alert.

Step 4 – Registering For

Your Monitoring Account

Once the Control Panel and sensors are

installed at home, you are ready to link

your Abbra system to the monitoring

service. In order to get your account up

and running, you will need to register.

Go To www.myabbra.com

i. Click on the REGISTER button in the

box called 'I am a new customer'.

ii. You will need to input the following

details:

_ The serial number of your Abbra Home

Control unit. This can be found on your

Control Panel. No spaces are necessary.

_ Where you purchased your Abbra

system

_ Title, First Name, Last Name.

_ A valid and secure email address. Your

temporary password will be sent here.

_ Home and Mobile telephone numbers.

_ Address, City, County, State, Zip Code.

Once this information is submitted you

will be asked to verify your email address

and your temporary password will be

sent to you shortly.

MEMORY (activated when an alarm has

occurred and the system is still armed,

turned off disarming and rearming

Abbra).

DELAY (during exit / entry delays).

BY KEYCHAIN REMOTE (upon pressing

the * button).

BY ZONES (by triggering any of 3

zones).

TOGGLE the PGM output will be turned

on upon event occurrence in these zones

and will be turned off upon next event

occurrence, alternately.

SCHEDULE select the time and specific

days you would like this trigger to turn the

lights on and off.

With the Abbra Home Control system,

you can choose on/off groups of

appliances at certain hours during certain

days according to your needs. For

example, during working days you can

create the following setting:

Automate 1 will turn off lights and

heaters when every body has left home

at 9.30

Automate 2 will switch on the heaters at

5.30 pm, just before the kids return

Automate 3 will switch on the washing

machine at 2.00 am on Monday and

Friday

Scenario 2 The Active Family

The Rogers family, a family of four, and

both mom and dad work outside the

home. Both children arrive home from

school on the bus around 3:30PM; a full

two and a half hours before either mom

or dad get home from work.

With Abbra the anxiety of wondering if

the children arrived home safely and

once home are tending to their home

work is eliminated.

•

Thanks to Abbra, the Rogers

children arrive home at 3:43PM.

•

They enter a secure and safe home

by turning the Abbra system off with

their Keychain Remote Control.

•

Abbra immediately notifies Mr. and

Mrs. Rogers that the children are

home safe and secure by sending

an email to Mrs. Rogers work email

address and text message to Mr.

Rogers cell phone.

•

The electrical outlet that powers the

TV set and the computer is

powered off so the children will not

be distracted while they are doing

their homework

•

Mr. Rogers calls home to speak with

the children, but the children have

been instructed not to answer the

phone when an adult is not home so

he uses his code to activate the long

range speakerphone in the Abbra

system and has a conversation with

the children without either having to

pick up a phone.

To realize this application, you

need:

•

Keychain Remote Control (Qty: 1 for

each child). Each keychain Remote

Control identifies which child turned

the Abbra system off upon arriving

home.

NOTE: The children's Keychain

Remote Controls will have to be

recognized by the Abbra control

panel and placed in available slots 5

through 8.

•

XPR X10 Duplex Receptacle (Qty: 1

for each electrical outlet) The X10

Duplex Receptacle can be

controlled by the Abbra system so

that any appliance plugged into it

will not receive power when the

receptacle is powered down by the

Abbra system.

NOTE: IF all of the XPR outlets will be

powered down at the same time

assign them all the same Unit Code.