- ページ 4

スピーカー Acoustic Energy Extreme 5のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Acoustic Energy Extreme 5 8 ページ。

5. Mounting Brackets

With speaker mounting locations selected, the Mounting Brackets can be attached

to the mounting surface or structure. Diagram Two illustrates the bracket, speaker

and associated components.

Use the bracket itself as a template to mark the mounting hole positions employing

a spirit-level to ensure the bracket is level. The mounting holes are provided with

key-hole slots to simplify attachment. At least two screws must be used to attach

each bracket.

Fittings (Rawlplugs, etc.) and screws are not included with the bracket but should

be chosen appropriately for the type and condition the of structure the brackets

are to be attached to. Extreme Series speakers are heavy and you must be sure

that the structure and fittings chosen are able to support their weight. If you have

any concerns over the suitability of the structure, or doubt in your ability to fix the

brackets securely, you should seek professional advice and help.

Diagram Two

Page

Upper

Attachment

Knob

Mounting

Bracket

Lower

Attachment

Knob

Once a bracket is securely fixed, attach the speaker by

offering it up to the bracket and inserting the threaded

section of each Attachment Knob in turn through the

bracket and into the threaded holes in the speaker.

Tighten the Attachment Knobs while holding the

speaker at the desired mounting angle.

The speaker cable can either be threaded through the

elongated hole in the centre of the Mounting Bracket

(before the bracket is attached) or left unattached to

the bracket. If the cable is to be threaded through the

Mounting Bracket make sure that there is enough

cable left free to enable easy attachment of the

Speakon plug and also that the cable is not trapped

behind the bracket when the mounting screws are

tightened.

Connecting the Speakon plugs and speakers is

described in the following section.