- ページ 7

コンピュータ・アクセサリー Camdata MeLockのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Camdata MeLock 8 ページ。

9.1 Reset to factory and Calibration

Reset to factory calibration with double tap on the Melock when it is not paired with

an activator.

But I am in the process of changing this –

The calibration feature will be removed.

The user will be able to select one of 4 calibration setting by using a MeLock

configuration program (downloaded from our website?)

The settings will be –

Close range

Medium range

Long range

Custom setting

With the custom setting the user will be able to set the connect and disconnect

thresholds himself

The user will also be able to enable/disable the "Fob double tap to lock the PC"

feature.

The user will also be to enable/disable the "Lock PC on removal" feature (if running

the "Melock Guard" program).

Problems that may occur:

Unreliable pairing

Pairing with the wrong PC

False Locking

Having to move too far away before PC locks

Cause:

Too many MeLocks in close proximity.

Calibration settings need adjustment

Solution:

Check that the MeLock is far enough from the MeLock attached to nearby

computers, if necessary then use the USB lead. MeLocks should be distanced

1.5m apart.

Try repositioning the Melock.

Try a different calibration setting

That's really all you can do.

May 1 1, 2 011