- ページ 5
スピーカーシステム Acoustic Energy AEGO5 plusのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Acoustic Energy AEGO5 plus 8 ページ。 Powered 5.1 surround sound speaker system
AEGOp5 Decoder
AEGOP5
AEGOp5 Front Panel
1. The POWER Button
2. LCD Display
Turns AEGO
5 on or off.
Provides you with
P
information regarding the
system status and settings.
Front
Rear
Left
Left
Centre
ACOUSTIC ENERGY LIMITED,
16 BRIDGE ROAD, CIRENCESTER,
GLOUCESTERSHIRE GL7 1NJ
WWW.ACOUSTIC-ENERGY.CO.UK
Front
Rear
Sub
MULTIPIN
Right
Right
Developed And Manufactured By Videologic Systems.
AEGOp5 Rear Panel
1. MULTIPIN Audio Output:
This output feeds 6 channels audio signals to the matching input on a control centre or power amplifier via a multipin (DIN) cable.
2. Main Outputs (Front Left, Front Right, Rear Left, Rear Right, Centre and Sub):
The Six outputs feed audio signals to the matching inputs on a control centre or power amplifier.
3. AUX1 AUX2 and LINE Inputs:
These inputs accept signals from stereo analog signal sources.
4. OPTICAL and DIGITAL inputs:
Your AEGO
5 has two types of digital inputs. One S/PDIF (OPTICAL) and one coaxial (DIGITAL) input. Connect the digital outputs of the
P
sound sources to these inputs.
5. 12V DC Power Input:
Connect the AEGO
5 power adapter to an AC outlet. Please refer to page 6 to determine the correct voltage in your area.
P
Front
Rear
Left
Left
Centre
Sub
Front
Rear
Right
Right
3. Speaker Channel LEDs
Each LED represents the status of an individual channel. When
a particular channel is active, the LED lights up.
The colour of the LED also indicates the frequency range of
that channel:
* Red means this particular channel has been set to output a wider frequency
range that contains bass signal between 20Hz to 120Hz.
* Green means this particular channel doesn't contain the bass signal between
20Hz to 120Hz.
Left
Right
AUX 2
AUX 1
LINE IN
OPTICAL
DIGITAL
POWER
IN
IN
12V DC
8
AEGOp5 Remote Control
9
6
input
power
2
1
mute
test
4
3
balance
delay
prologic
7
5
field
EQ on/off
EQ setup
8
10
preset 1
preset 2
preset 3
11
save1
preset 4
load
12
13
BassManager
Cen
14
15
SL/SR
SW
VOL
D Time
DRC
18
reset
19
17
16
9
1 POWER Button
On/off key
2 INPUT MODE Button
Select from the 5 different source inputs
3 TEST Button
Test signal for the 6 discrete channels
4 MUTE Button
Mute the sound (toggle on and off)
5 PRO LOGIC Button
Select from 4 different surround settings
6 DELAY Button
Select the desired channel to engage the time
delay adjustment
7 BALANCE Button
Set the volume setting for each of the 6 channels
8 EQ SETUP Button
Select up to 5 EQ Band Settings
9 EQ ON/OFF Button
Activate the selected EQ Band Setting
10 FIELD Button
Select from 6 different sound fields
11 PRESET Button (P1, P2, P3, P4)
Recall up to 4 different presets
12 SAVE Button
Store your settings into a selected preset
13 LOAD Button
Activate your saved setting stored in selected preset
14 SPEAKER ON/OFF Buttons (CEN, SL/SR, SW)
CEN Button activates/deactivates the centre
channel speaker.
LS/RS Button simultaneously activates/deactivates
the left and right rear speakers.
SW Button activates/deactivates the subwoofer.
15 BASS MANAGER Button
Switches between three bass configurations
(bass config.1, bass config.2 and bass config.3)
16 VOL + and VOL -
Increase/decrease the volume.
17 D TIME Button
Increase/decrease the delay time.
18 DRC Button
Select among 3 different dynamic range
compression ratios.
19 RESET Button
Resets the system to its factory default settings.