- ページ 3

アンプ Acoustic Image Coda CorusのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Acoustic Image Coda Corus 12 ページ。 S4plus

ページを印刷する

-Headphone output

-Switchable limiter

-Mute switch

-Mono or stereo ouput from the preamp section

-Selectable internal jumper options for gain and stereo

operation

-High fidelity, low noise operation: 110 dB SNR at direct

out

-Automatic voltage switching for universal AC mains

operaton

-650 Watt output at 4 ohms (music power)

-Dual speaker outputs with speakon connectors

-Comes with padded case and speakon to 1/4 inch adapter

The features of the S4plus combo amps are:

-Clarus amp docks in cabinet using our exclusive Cabrio

Docking System

-Sealed two-way speaker system

-Coda:

-Lightweight (22 lbs) structural foam cabinet

-10 inch poly cone woofer + 5 inch extended

range midrange with level switch

-Corus:

-Lightweight (22 lbs) structural foam cabinet

-10 inch paper cone woofer + 5 inch extended

range midrange with level switch

-Ten2

-Lightweight (34 lbs) structural foam cabinet

-Downfiring + forward firing poly cone 10 inch

drivers + 2.5 inch tweeter with level control

-Exclusive Room Coupling Control for DF woofer

-All combos come with a fitted slip cover

While our combos and speakers are designed to play loudly--and

clearly--enough so that you can be heard in most gigging situations,

they are not suited to playing at extreme volumes. Generating high

SPLs may require an extension cabinet like the Coda EX, Corus EX,

Ten2 EX or augmentation by a larger house system.

The instructions that follow apply to all of the S4plus products due to

the many common elements in the different units. Where there are

specific differences that are unique to one or more units, those

differences are described. The Clarus amp head is described first

followed by the common elements of the combo amps (docking

system, tilt mechanism, cabinet placement, etc). The specifics of each

cabinet type are then described followed by detailed specifications of

all of the models.

Operation--Clarus Head

Power

Rtn

Snd

Auto Voltage Switch

AC Input

Ch 1

100-240 V

50/60 Hz

Ch 2

600 Watts

H/P

Preamp Out

Effects Loops

Power Switch Fuse

Clarus Rear Panel

Rtn

Snd

Auto Voltage Switch

AC Input

Ch 1

100-240 V

50/60 Hz

Ch 2

600 Watts

H/P

Preamp Out

Effects Loops

Power Switch Fuse

Speaker Input

8 300W

Coda, Corus and Ten2 Rear Panel

(shown in the docked position)

Plug the detachable AC power cord into the receptacle on the back of

the amp and into a wall receptacle. A power switch next to the AC input

turns on power to the pre- and power amps, illuminating a "power on"

indicator on the front panel of the amp.

mounted in the drawer marked with the fuse symbol that is part

of the AC receptacle. To replace the fuse, turn off the amp,

remove the AC cord and use a small screwdriver to pry the

drawer out of the receptacle. Remove and replace the fuse.

that a spare fuse is mounted inside the drawer.

Our amps and combos all operate with AC voltages between 100V

and 240V, 50/60 Hz. An internal switch automatically selects the

correct mode of operation for that voltage range. No user action is

required to set the unit to operate with different AC voltages. Note that

the correct AC power cord must be used for connection to the

appropriate wall plug. If you do not have the right cord, you can buy

one from an electronics or computer store.

Note that when the power switch is off and the power indicator is off,

power is not completely removed from the amp. To completely remove

power, disconnect the power cord. Always leave the power cord

accessible so that you can easily disconnect power from the unit.

Note that there is a 5 to 10 second delay after the power has been

turned before the amp becomes operational. This is done so that

"start up" noises are not heard.

Preamp

Refer to the signal flow and the control panel diagrams (page 9).

Speaker Output 2

min. Use Class 2 Wiring

CAUTION

Risk of Electric

Shock. Do Not

Open. Do Not

Expose to Rain

Or Moisture

Off On

Limiter

Stereo Out