- ページ 19

3Dプリンター 3DGence DOUBLE P255のPDF メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。3DGence DOUBLE P255 19 ページ。

LUBRICATING THE Y AXIS

1. Move the heatbed to the front of the printer until it stops, to get access the Y axis linear carriage grease

nipple (Fig.76)

2. Push grease out by pressing the lubricator nozzle firmly against the grease nipple of the Y axis carriage and

pressing smoothly the lubricator lever once.

Fig.76 Linear carriage grease nipple Y axis

3. Move the heatbed back and forth twice.

4. Remove excess grease from the linear carriages using a paper towel.

5. Push grease out by pressing the lubricator nozzle firmly against the grease nipple of the Y axis carriage and

pressing smoothly the lubricator lever once.

6. Move the module back and forth twice.

7. Remove excess grease from the linear carriages using a paper towel.

3DGence DOUBLE P255 - maintenance activities | version 07.2021