- ページ 5
ガレージドアオープナー CAME BY-3500TのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。CAME BY-3500T 12 ページ。 Complete kit for a sliding gate weighing up to 3500kg / max. width 23m
CAME BY-3500T にも： マニュアル (17 ページ)
ページを印刷する
BY-3500T:
Preliminary checks
1. Ensure that all surfaces are perfectly level (Do not install on slopes)
2. Foundation frame dug out
3. Set up the corrugated tubes needed for the wiring coming out of the junction pit.
4. Use Ø 40 mm corrugated tubes to connect the gearmotor to the accessories
5. Prepare a Ø 20 mm tube to run the release cord through A.
6. Use Ø 40 mm corrugated tubes to connect the gearmotor to the accessories
The number of tubes depends on the type of system and the accessories that are going to be fitted
gate GEOMETRY
Max Leaf Length (m)
23
480
171
167
=
=
275
295
INSTALLATION
Please refer to the full manual for installing the motor, rack and setting travel end points
GEOMETRY
Max Leaf Weight (kg)
3500
1-2mm. The rack and pinion should mesh.
Do not allow the rack to rest on the pinion.
The gate motor must be installed parallel to the gate.
Tick