- ページ 14

ガレージドアオープナー CAME PRATICO SYSTEM BX-PのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。CAME PRATICO SYSTEM BX-P 19 ページ。 Automation for sliding gates

3) Repeat the procedure of parts 1 and 2 with the

"CH2" key, associating it wit another transmitter

key.

N.B.: if the code needs to be changed, repeat the

sequence described above.

8 Installation procedure for the remote control for automatically releasing the motor

(pratico system)

The "pratico system" automatically releases the automation through the radio transmitter.

In the absence of 230V power, pressing the key (the same one memorized for opening the gate) or with another key of the radio

transmitter, the electrical lock is activated, releasing the gearmotor and making it possible to manually open the gate.

After 15 seconds, the system relocks automatically.

Before installation, read the procedures below:

- preparation of the radio board (paragraph 8.1);

- battery connection and memorization of the code on the control board (paragraph 8.2).

8.1 Preparation of the radio board (AF2)

Disconnect the 230V power and insert

the AF2 radio card (with the same

frequency used for AF1 card, ref. par.

7.1, pg.12) in the slot (ref. part 11, pg.

8), the motherboard recognises it only

when it is battery powered.

CH2

Radio board (AF2)

Motherboard