計測機器 Aeris A300 XTのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Aeris A300 XT 2 ページ。
ページを印刷する
You must read and understand the Operating Manual (on the enclosed
CD) and the Dive Computer Safety and Reference Manual (booklet
enclosed) before diving with this product.
Once 10 minutes elapse, while on the suface prior to a dive, operation enters
Power Saver Mode (PSM) until a button is pressed to resume operation.
MAIN >> ALT 1 > ALT 2 > ALT 3 > FLY/DESAT > LOG > SET > HIST > ID.
NORM (TECH) Surface Main
(no dive yet, Nitrox)
M
<< WARNING >>
Press any button to activate.
Surface Sequence:
S
A
A
• Press & release - to step, or hold
to scroll, through the Surface
Sequence.
• In Settings - increases value.
M
• Press & release - to step back
through the Surface Sequence.
• In Settings - decreases value.
• From Surface Sequence or in
Settings, hold (2 sec), or no
button action (2 min) - reverts to
Surface Main.
S
• From Surface Main, press &
release, or hold - for Backlight.
• In Surface Sequence - selects
item.
• In Settings - saves value.
• From Surface Sequence or
Settings, hold (2 sec) - to step
back to a previous item.