スピーカー Acoustic Research AWSBT4BKのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Acoustic Research AWSBT4BK 2 ページ。 Portable wireless speaker
Acoustic Research AWSBT4BK にも：設置および操作マニュアル (2 ページ), 設置および操作マニュアル (4 ページ)

ページを印刷する

Portable

Wireless

Speaker

Model

AWSBT4 / AWSBT4BK / AWSBT4-B

Installation and Operation Manual

Important Information

CAUTION

Caution:

To reduce the risk of electric shock, do not remove cover (or back). No

RISK OF ELECTRIC SHOCK.

user serviceable parts inside. Refer servicing to qualified service personnel.

DO NOT OPEN.

Important Safety Instructions

8. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

1. Read these instructions.

point where they exit from the apparatus.

2. Keep these instructions.

9. Unplug this apparatus during lightning storms or when

3. Heed all warnings.

unused for long periods of time.

4. Follow all instructions.

10. Refer all servicing to qualified service personnel.

5. Clean only with dry cloth.

Servicing is required when the apparatus has been

6. Do not block any ventilation openings. Install in

damaged in any way, such as power-supply cord or plug

accordance with the manufacturer's instructions.

is damaged, liquid has been spilled or objects have fallen

7. Do not install near any heat sources such as radiators,

into the apparatus, the apparatus has been exposed to

heat registers, stoves, or other apparatus (including

rain or moisture, does not operate normally, or has been

amplifiers) that produce heat.

dropped.

For PLUGGABLE EQUIPMENT, the socket-outlet shall

The apparatus shall not be exposed to dripping or

be installed near the equipment and shall be easily

splashing or placed near objects filled with liquids.

accessible.

Care and Maintenance

• Always use a soft cloth to clean the speaker and transmitter. Never use any product containing alcohol or other

solvents as they may damage the surface.

• Use caution when plugging the power transformers in an AC outlet to avoid the risk of electric shock.

• If the speaker are used outside on a deck or patio, make sure you take them indoors in the event of a rainstorm to

prevent possible damage.

• Do not operate or store the system in extreme temperatures (below 32ºF/0ºC and above 122ºF/50ºC).

Product Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the

serial and model numbers in case you need them. These numbers are located on the product.

Model No.: _____________________________________________________________________________________________

Purchase Date: _________________________________________________________________________________________

Dealer/Address/Phone: __________________________________________________________________________________

Introduction

The portable wireless speaker makes it easy to take your music wherever you go and share it

whenever you want, with Bluetooth® wireless connectivity and a built-in auxiliary input. It's

compact, easy-to-carry and simple to use.

This manual covers various connection options and detailed operating instructions for

making the customizable portable wireless speaker a part of your lifestyle. If, after having

reviewed the instructions, you have any questions, please call toll-free 1-800-732-6866 or

visit www.acoustic-research.com.

Tour of the Speaker

Back panel

Power and Pairing indicator

the speaker.

Blue, slow blinking:

or connected.

Blue, fast blinking:

pairing mode. See the Bluetooth Setup section for more

information.

Solid blue:

The speaker is paired with a Bluetooth-

enabled device or the auxiliary audio input is

connected.

ON/OFF button

turns the speaker on and off.

- VOLUME +

buttons adjust the speaker's volume

level.

Pair button (Press and hold for 3 seconds)

puts the speaker in pairing mode for Bluetooth setup

(press and hold for 3 seconds). It also performs a fast

reconnect with devices that have lost connection (press

and release). See the Bluetooth setup section for more

information

AUX IN

connects directly to your MP3 player,

smartphone, or other portable audio device, using the

3.5mm audio in cable provided.

DC IN

receives the small round end of the included 12V

DC 1000mA AC power adapter; remove the protective

cover to insert the adapter.

Bottom panel

Battery Compartment Cover

AA batteries.

Powering the Speaker System

Powering the Speaker

There are two options to power your wireless speaker: using the included AC power adapter

or using 8 AA batteries (not included).

AC Power Adapter

AA Batteries

shows the status of

Remove the battery compartment cover on the bottom of the speaker.

The speaker is on but not paired

Insert eight (8) AA batteries (not included) into the speaker following the polarity ("+"

and "-") as diagrammed inside the battery compartment.

Replace the battery compartment cover on the bottom of the speaker.

The speaker is in Bluetooth

Note:

Place the rubber cap in the speaker power input jack when using batteries.

DO NOT

mix batteries with different chemistry types (for example, a zinc battery with an alkaline

DO NOT

battery).

mix new and used batteries.

when not in use for long periods. Always remove old, weak or worn-out batteries promptly and

recycle or dispose of them in accordance with local and national regulations.

Setting Up Bluetooth Wireless

Pairing

The Bluetooth-enabled device that you wish to stream audio to your speaker system must

first be paired to the speaker. The process is simple, and in most cases the pairing process

needs to be done only once.

To pair your Bluetooth-enabled device with the speaker:

Make sure your device's Bluetooth is turned on. See the wireless and/or network settings

menu on your device to check.

If the speaker isn't already on, press the ON/OFF button to turn it on. You will hear the

turn on music to indicate the speaker is turned on. The indicator light at the back of the

speaker starts flashing blue.

Open the Bluetooth settings menu on your device. Select "AR AWSBT4" from the list of

devices available (you might have to scan for devices). If your device asks for a password,

remove to install 8

enter "0000".

A confirmation screen will appear on your device once the speaker and the device are

successfully paired. The blue indicator turns solid blue to indicate successful connection.

The speaker is now ready for you to stream audio from your device.

Turn the volume on your device to at least 3/4 max, then start playing something on the

device. Control the speaker volume on the speaker itself, using the Volume +/– buttons at

the back of the speaker.

Note:

• If you notice the sound from the speaker is distorted, turn down your device's volume.

Reconnecting

When you turn it on, the speaker reconnects automatically with the last paired device. When

you leave the Bluetooth operating range, with the speaker turned ON, it disconnects. When

you come back into the Bluetooth operating range, press the Pair button to reconnect to the

last paired device. The successfully paired music will sound once it has been successfully

connected.

Insert the small, round plug from the speaker AC

power adapter into the

jack on the bottom

panel of the speaker.

Plug the other end of the speaker AC power

adapter into any standard 120V AC wall outlet.

Notes:

Be sure to use the speaker AC power adapter

rated 12V DC 1000 mA.

The power unit should be plugged in so that it stays

vertical or lies flat.

DO NOT

leave batteries installed in the product